Garmin G3X Pilot's Manual page 262

Hazard Avoidance
t v
raFFiC oiCe
A traffic voice alert is generated whenever the number of Traffic Advisories on the
G3X screen increases from one scan to the next. Limiting Traffic Advisories only reduces
the "nuisance" alerting due to proximate aircraft. For example, when the first Traffic
Advisories appear on the TIS-A display, the user is alerted audibly. So long as a single
aircraft remains on the traffic display, no further voice alert is generated. If a second
(or more) aircraft appears on the screen, a new voice alert is sounded.
If the number of Traffic Advisories on the traffic display decreases and then increases,
a new voice alert is sounded. The traffic voice alert is also generated whenever traffic
becomes available. The following traffic voice alerts are available:
• "Traffic"— Traffic alert received.
• "Traffic Not Available"—Traffic service is not available or out of range.
Enable/disable 'Traffic Not Available' voice alert:
1) Press the MENU Key twice to display the Main Menu.
2) Turn or move the FMS Joystick to highlight 'System Setup...' and press the
ENT Key.
3) Turn or move the FMS Joystick to highlight 'Sound', and press the ENT Key.
4) Move the FMS Joystick to highlight the Traffic N/A Alert field.
5) Turn the FMS Joystick to highlight 'On' or 'Off'.
6) Press the FMS Joystick, the CLR Key, the EXIT Softkey or the MENU Key to
return to the previous page.
t w
raFFiC arning
When a traffic threat is imminent, the Traffic Warning Window is shown. The Traffic
Warning Window shows a small pop-up map in the lower left corner. The Range Rings
on the pop-up alert are spaced every whole mile/kilometer/nautical mile. Press the
CLR Key to remove the Traffic Warning Window.
NOTE: The Traffic Warning Window is disabled when the aircraft ground speed
is less than 30 knots or when on the approach leg of a route.
240
a
lertS
w
inDow
Garmin G3X Pilot's Guide 190-01115-00 Rev. K