Vertical Power Fault Indications - Garmin G3X Pilot's Manual

Annunciations & Alerts
Alert Condition
High speed
Protection
Low speed
Protection
AFCS AURAL ALERT
Manual disengagement of the autopilot is indicated by a five-second flashing yellow
'AP' annunciation and an aural (bee-boop) alert. Cancel the aural alert by pressing and
releasing the AP/CWS Button again (GSA 28 autopilot only)

VERTICAL POWER FAULT INDICATIONS

Device Fault
O v
ver Oltage
O C
ver urrent
n C
O urrent
s C
hOrt irCuit
r
unaway
s D
witCh isableD
F C XX
ault ODe
e
rrOr
384
Annunciation
Autopilot unit will raise the nose to limit the
MAX SPEED
aircraft's speed.
Autopilot unit will lower the nose to prevent
MIN SPEED
the aircraft's speed from decreasing.
Speed Alerts
Voltage too high (only appears for alternator devices).
Device current too high.
Device not drawing current (possible open circuit.
Short circuit detected.
Flap or trim runaway condition detected.
Flap or trim switch disabled.
XX indicates an internal VP-X fault code (consult Vertical Power for
details).
Unable to clear fault or other error occurred.
Device Faults
Garmin G3X Pilot's Guide
Description
Description
190-01115-00 Rev. K