CNS Interface
FLIGHT ID REPORTING
NOTE: The Flight ID must be configured to 'Set By Pilot' in Configuration Mode
for the SET ID Softkey to appear. Refer to the G3X Installation Manual for
more information.
Entering a Flight ID:
1) From the full-screen PFD and/or the split-screen PFD Page, press the XPDR
Softkey.
2) Press the MODE Softkey.
3) Press the SET ID Softkey. The 'SET FLIGHT ID' Window appears.
4) Enter the desired Flight ID using the FMS Joystick and press the ENT Key.
130
Transponder
Flight ID
Flight ID Entry (Split-Screen PFD Page)
Garmin G3X Pilot's Guide
Entry
190-01115-00 Rev. K