F - Manual Image Control Features - GE Everest Ca-Zoom 6.2 Operating Manual

Appendix F - Manual Image Control Features
Auto White Balance
This mode computes the white balance value output using the color information from the entire
image. It outputs the proper value using the color temperature radiating from a black subject
based on a range of values from 3000K to 7500K as a reference.
One Push WB
Is a fixed WB mode that can be adjusted by the user. It assumes the image is of a white subject
occupying more than 1/2 of the image and adjusts the WB accordingly to the current lighting
conditions. OPWB data is lost when the camera is powered off and the camera returns to AWB
on power on.
Manual Camera Control
The settings of these modes are lost when the camera is powered off and the camera returns to
fully automatic operation on power on.
• Brightness
Adjusts both the Gain and Iris using an internal algorithm according to the brightness level
set by the user. Brightness is controlled by Gain when the image is dark and by Iris when
the image is bright.
• Shutter
adjusts shutter speed from 1second to 1/10,000sec in 22 steps
• Iris
adjusts Iris from f1.6 (PTZ140) or f1.8 (PTZ100 / PTZ70) to Close in 18 steps
• Gain
adjusts Gain from -3 dB to 28 dB in 15 steps
Image Button
Adjusts the internal reference brightness level used in the Full Auto mode in 15 steps. This allows
the camera to automatically adjust for changing lighting conditions while maintaining the selected
brightness of the image.
Image Stabilization
This function helps obtain a stable image free of vibration caused by jarring movements. For a
vibration frequency of around 10Hz, correction is approximately 90%
®
Everest Ca-Zoom 6.2
93