GE Everest Ca-Zoom 6.2 Operating Manual page 67

66
UPDATE SOFTWARE
Menu Feature
• Allows software updates to be loaded from CompactFlash card into the PTZ system.
Usage
• Software updates may be performed in the field without the need for the product to be sent back
for factory service.
Access Operation
• Highlight UPDATE SOFTWARE.
• Locate the CompactFlash card to be used to update the PTZ system.
• Install the main program memory card into the CompactFlash drive on the CCU.
• Press ENTER.
• The PTZ system will search for updated software.
• If update files are detected, press ENTER. The system will then automatically install the software
(if software is not found, the PTZ system will prompt you to press ENTER to terminate the update
process).
• After the update is successfully loaded, "Update Successful" will be shown on display.
• Turn power off.
• Wait 30 seconds, turn power on.
To Accept
• After power has been cycled, the PTZ system will automatically power-up and execute the
updated software.
®
Everest Ca-Zoom 6.2