Long Exposure - GE Everest Ca-Zoom 6.2 Operating Manual

Long Exposure

Usage
• The PTZ's embedded computer will allow the camera's electronic shutter to remain open
until the image being acquired has a brightness level that matches a factory preset value.
Access
• Highlight CAMERA SETUP
Operation
• Move pointer arrow to either ON or OFF
• Press ENTER. A check mark will appear next to your selection.
To Accept
• Press MENU
Manual Image Control
Usage
• For advanced manual control of Shutter, Iris and Gain
Access
• Highlight Manual Image Control
Operation
• Move pointer arrow to either ON or OFF
• Press ENTER. A check mark will appear next to your selection.
To Accept
• Press MENU
Operation to setup Manual Image Control
• Press image button on Hand-held Controller. Soft buttons will appear on the LCD.
• Use soft buttons for selection of individual control of BRIGHTNESS, SHUTTER, IRIS, GAIN.
(The Brightness function is a predetermined combination of iris and gain).
Example:
• Press soft button labeled IRIS
• Press Image button on Hand-held Controller for manual control of IRIS
Access
• Highlight Manual Image Control
Operation
• Move pointer arrow to either ON or OFF
• Press ENTER. A check mark will appear next to your selection.
To Accept
• Press MENU
®
Everest Ca-Zoom 6.2
39