GE Everest Ca-Zoom 6.2 Operating Manual page 32

When Text May Be Added to Images
• Text may be added to images at any one of the following times:
• When an image is frozen, text may be added to the image prior to storing the image by:
- Using the keyboard or joystick
- Recalling preset text
• Whenever an image is recalled from memory, text may be added and saved with the
image by:
- Using the keyboard or joystick
- Recalling preset text
• At any time during live image viewing.
Use of Joystick (via onscreen keyboard) to Generate Text
In any screen which requires text generation:
• A blinking cursor and an on-screen keyboard appears.
• Use the joystick to navigate the cursor through the character window. Highlight the
desired character and press ENTER. To create a space, select the right arrow or any
location in the on-screen keyboard window that has no character and press ENTER.
• When a character is selected the cursor automatically moves to the next character entry
position. To backspace or navigate between lines, use the arrows in the on-screen key-
board window.
Use of an External Keyboard to Generate Text
In any screen which requires text generation:
• Plug in a PS/2 compatible keyboard into the "keyboard" connector located on the
camera control unit labeled "Keyboard." (Note: the keyboard may be plugged in
or removed after the PTZ has been turned on).
• Type characters using the keyboard.
• The arrow keys may be used to locate the text on the screen.
Still Image Annotation
Saving Text with New or Recalled Images
When a recalled image is displayed on the hand-held controller LCD monitor, or prior to saving
an image to memory, while the frozen image is displayed:
• Press MENU. A menu will appear which contains STILL ANNOTATION.
• Highlight STILL ANNOTATION. A drop-down menu will appear.
• Use the pointer arrow to select ADD TEXT.
• Press ENTER.
• You may now use the joystick or external keyboard to add text to the image.
• Press MENU when all text has been added.
®
Everest Ca-Zoom 6.2
3