68
en | Network Communications
12
13
14
15
16
The following prompt appears:
4
Notice!
In most cases, do not assign a password. If a password is necessary, store it in a safe place. If
i
you lose or forget the password, you cannot connect to D6100i using telnet until you send the
unit to the factory for password removal, and the unit is returned to you.
The Setup Mode information appears.
1.
2012.11 | 08 | 4998122704
255.255.240.0
255.255.224.0
255.255.192.0
255.255.128.0
255.255.0.0
Press Enter to accept the password setting at none.
Type 1 and press Enter to set up Channel 1 configuration. This information appears.
Installation and Operation Guide
Conettix Communications Receiver/
28
240.0.0.0
29
224.0.0.0
30
192.0.0.0
31
128.0.0.0
Bosch Security Systems, Inc.
Gateway