3. System Installation
3.1 Before Installation
Camera 1-16
Mouse
The installations described below should be made by qualified
service personnel or system installers.
Please make sure to set the Power Selector Switch before plugging in
the power plug to avoid damaging the EDR1600. Use a
screwdriver to set the switch to the correct position so that the
number shown is the same as the local AC voltage.
Please refer to the following diagram for the system connections.
VGA Monitor
Alarm In
Keyboard
CD-RW
DVD RAM
PTZ Camera
Printer
Administrator's Guide and Operating Instructions
Main TV Monitor
Audio Out
Audio In
8
Alarm Out
External Hard Disk Array
EDA800
Ethernet
Call Monitor