EverFocus PowerPlex EDR1600 Administrator's Manual And Operating Instructions page 60

¡½ Right Panel
W1 ~ W4 Camera / Type – Select the display cameras for Window 1 ~
Window 4. Click on the down arrow button to select the desired
camera for each window, and then select Live or Play from the
options below for Live Video or Image Playback for each
window. Click on the Submit button while the setting is
completed.
PTZ - Click on the PTZ button, a PTZ control panel will be shown on
the screen as below.
Playback Date/Time – Sets the searching date/time for Image Playback.
Enter the desired date and time in the proper columns, click on
the Submit button to change the setting. The Playback
Date/Time searching is based on the system clock
please enter the local date/time for searching if there's time
difference between local and remote end.
Alarm Out – Enables/disables the alarm out remotely.
¡½ Lower Panel
–
–
/ –
Administrator's Guide and Operating Instructions
Reboots the system remotely.
Views the log file of the system.
Switches between quad screen and full screen mode.
57
Select the camera number which
with the PTZ camera installed.
There are 2 reaction methods in
adjusting the camera directions and
zoom focus – Continuous (Default)
and Step. Click on the Step button
if the user wants to adjust it step by
step.
The other control functions are the
same as on the system. Please refer
to Chapter 7 for PTZ Control
Functions.
Click on the Playback button to
return to the Playback control
panel.