View Display & Print Image - EverFocus PowerPlex EDR1600 Administrator's Manual And Operating Instructions

4.1 View Display & Print Image
Each display view window can be individually configured by
Administrator and Supervisor, including the display camera setup,
live/playback mode and print image etc.
Operations:
Click on the desired view window, the following dialog box will be shown
on the screen.
The following is a brief description for each item shown above.
n Camera – Use the down arrow button to sele ct the camera to display
on this view window.
n Live/Playback – Selects show live or playback image on this view
window. (Please refer to Chapter 8 for the details of Image Playback
and Archive)
n Print – Prints the image shown this view window.
n Switch To Full Screen – While the system is under playback mode,
check on this item can switch the view window to full screen.
There are 4 kinds of devices in the status indication. The
displaying order is Camera, Alarm Output, Hard Disk, Alarm Input,
and then back to Camera. Each status bar stands for the status of one
device, the bottommost for ID#1. There are 5 different colors:
GRAY/BLACK – Not existent or not installed,
GREEN – Normal,
YELLOW – Video Loss detected for Camera, Alarm for Alarm
Input/Output, and Recording for Hard Disk
RED – Motion detected for Camera.
Administrator's Guide and Operating Instructions
13