EverFocus PowerPlex EDR1600 Administrator's Manual And Operating Instructions page 61

While the camera and date/time settings for image playback have
been submitted, operate the following buttons for video playback.
–
/
/
–
Slider Bar –
Note. 1 The best viewer's environment is Internet Explorer 5.0 or above, 1024 x 768
If the PC is protected by the Firewall, please make sure Port 1600 is enabled
before accessed.
Note. 2 The Login Name and Password are the same as used in the system,
the Administrator can operate all the functions on remote end, the Supervisor
can view the live video and playback image, and the Operator can only view
the live video.
Note. 3 You must have the upgrading software in your remote PC in order to remote
upgrade the system. To obtain the software, you may contact your local
distributor or to download from FTP server directly. The IP address is
ftp://www.everfocus.com.tw, the login name is"edr1600" and password is
"focus1600". Select the software version you would like to download, the
file name of the upgrade software will be "edr1600-X.X-tar.gz", X.X stands
for the software version number.
Note 4 The remote end will not be able to view all the camera windows if there 's any
camera set as 0 FPS for the normal recording rate; unless all the cameras are
set as 0 FPS.
Administrator's Guide and Operating Instructions
Stops the playback image. The playback image will
starts from beginning if the user click on the Play
button again.
– Click on forward/backward play button to start
playing/reverse playing video on its corresponding
window. (Note.4)
– The next/previous single image corresponds to the
selected playback cameras will be played and displayed
on its corresponding video window.
Pauses the playback image.
Shows the current playing position for image
playback. Click on it and drag the mouse to play the
video from anywhere in the selected range.
58