EverFocus PowerPlex EDR1600 Administrator's Manual And Operating Instructions page 34

Hide thumbs Also See for PowerPlex EDR1600:

Table of Contents

n Normal State – NC or NO, please check the signal types connected

to the Alarm Input Terminal on the rear panel of the system. Use

the Down arrow button to select the signal type.

n Enable Alarm Action – Check to enable Alarm Action for the

selected Alarm Input at the selected Time Type.

n Alarm Action – The corresponding Alarm Action if the Alarm Input

changes its state from normal to alarm. Up to 16 Alarm Actions

are selectable.

Administrator's Guide and Operating Instructions

Table of Contents