EverFocus PowerPlex EDR1600 Administrator's Manual And Operating Instructions page 50

Auto Pan – Enables the Auto Pan function. Select the speed
¡½
(high, Medium or Low) from the above column by using the
down arrow button, then click on Auto Pan button to start. The
camera will run between the defined start and end position.
Click on Auto Pan button again to stop running.
¡½ Sequence – Enables the Sequence Mode. In sequence Mode,
the camera will go to each preset position sequentially by the
preset dwelling time. Select the dwelling time (3-60sec) from
the above column by using the down arrow button, then click
on Seq button to start the Sequence Mode. Click on Seq button
again to stop.
¡½ Iris – Adjusts the brightness level of the PTZ camera. Click on
Inc. to get brighter picture. Click on Dec. to get darker picture.
¡½ Menu – For EverFocus ED2200 and SamSung SCC-641P
models use only. Please refer to the user manuals of the above
PTZ cameras for the detail information.
¡½ Enter –For EverFocus ED2200 and SamSung SCC-641P
models use only. Please refer to the user manuals of the above
PTZ cameras for the detail information.
Administrator's Guide and Operating Instructions
47