Associating The Https Service With An Acl; Displaying And Maintaining Https; Https Configuration Example - 3Com 4500G Family Configuration Manual

To do...
Enter system view
Configure the port number of the
HTTPS service
If you execute the ip https port command for multiple times, the last configured port number is used.

Associating the HTTPS Service with an ACL

Associating the HTTPS service with an ACL can filter out requests from some clients to let pass only
clients that pass the ACL filtering.
Follow these steps to associate the HTTPS service with an ACL:
To do...
Enter system view
Associate the HTTPS service with
an ACL
If you execute the ip https acl command for multiple times to associate the HTTPS service with
different ACLs, the HTTPS service is only associated with the last specified ACL.
For the detailed introduction to ACL, refer to ACL Configuration in the Security Volume.

Displaying and Maintaining HTTPS

To do...
Display information about
HTTPS

HTTPS Configuration Example

Network requirements
Users can access and control the device through logging in to the Web page. To prevent unauthorized
users from accessing and controlling the device and enhance the device management security, the
device requires the users log in to the Web page through HTTPS and authenticates the users using SSL,
and ensures that the transmitted data will not be spoofed and tampered.
To meet the requirements, the following configurations need to be performed:
Use the command...
system-view
ip https port port-number
Use the command...
system-view
ip https acl acl-number
Use the command...
display ip https
2-4
Remarks
—
Optional
By default, the port number of the
HTTPS service is 443.
Remarks
—
Required
Not associated by default.
Remarks
Available in any view