Manual Clock Setting; Time Zone - Pioneer DVR-560HX-K Operating Instructions Manual

Getting started
04
•

Manual clock setting

If no stations in your area are
broadcasting time signals, you can set
the clock manually.
Use the / buttons to set your

time zone.

You can set this by selecting a city or a
time relative to GMT.
k Setting Manual Clock Setting
t Line System
Time Zone
er Save
P
p Navigator p Navigator Summer Time
Press  then use the / buttons to
select 'On' or 'Off' for summer time,
then press ENTER.
Select On if you are currently using
summer time.
k Setting Manual Clock Setting
t Line System
Time Zone
er Save
P
p Navigator p Navigator Summer Time
Set the date (day/month/year) and
time, then press ENTER to make all
the settings.
k Setting Manual Clock Setting
t Line System
Date
er Save
P
Time
p Navigator p Navigator
Time Zone
Summer Time
• Use the / buttons to change the
value in the highlighted field.
• Use the / buttons to move from one
field to another.
• Press ENTER to finish setting the time.
ENTER
10 Select the EPG (Electronic
Programme Guide) type to use.
• GUIDE Plus+: Use the Gemstar GUIDE
Plus+ EPG (see also Setting up the
GUIDE Plus+® system on page 35 and
Using the GUIDE Plus+® electronic
programme guide on page 39).
• Digital EPG: Use the SI EPG
(programme information broadcast
34 together with digital channels).
En
1/2
England
London
O f f
1/2
England
London
O n
2/2
TUE 01 / 01 / 2008
00 : 00
England
London
O n
• If no channels were found when
scanning for digital TV channels then
this screen does not appear and the EPG
is set according to the country set in step
7 above.
ENTER
11 Select the TV screen type,
'Wide (16:9)' or 'Standard (4:3)'.
k Setting TV Screen Size
Line System
er Save Wide (16:9)
P Standard (4:3)
p Navigator p Navigator
ENTER
12 Select whether or not your TV
is compatible with progressive scan
video.
k Setting Progressive
Line System
er Save Compatible
P Not Compatible Not Compatible
p Navigator p Navigator Don't Know
• This screen is not displayed when an
HDMI signal is being output.
13 Press to continue after reading
ENTER
the HDD caution.
k Setting In the event of HDD failure, recordings may
be lost or normal playback/recording may
t Line System
not be possible.
er Save
As recordings might be lost in case of an HDD
P
failure, we recommend to use the HDD only
as temporary storage media.
p Navigator p Navigator
Please copy recordings you want to keep
to recordable DVD.
Press ENTER to continue.
ENTER
14 Select 'Finish Setup' to exit the
Setup Navigator, or 'Go Back' if you want
to start again.
k Setting
t Line System S e t up is c o mple t e !
er Save
F inis h S e tu p F in is h S e tu p
p Navigator p Navigator Go B a c k
That completes basic setup using the Setup
Navigator.
• If there are blank channels with no
station, you can set these to skip using
the manual channel setting. See Manual
CH Setting on page 137.