Pioneer DVR-560HX-K Operating Instructions Manual page 38

Getting started
04
Checking the downloaded data the
following day
GUIDE
1 Display the GUIDE Plus+ screen.
You should see a grid filled with channel
logos and TV listings information. Use the
/ buttons to review the list. If you notice
that there are channels missing, or that
there are channels in the list that you don't
get, go to the Editor screen:
• Press  repeatedly until the Menu bar is
highlighted.
• Press  until Editor is highlighted. The
main area of the screen now shows a list
of channels. Those that are turned ON
are displayed in the grid; those that are
OFF are hidden. Use the ///
buttons to move down the list and turn
channels ON or OFF as necessary.
• For any channel that you turn ON, the
GUIDE Plus+ system will need to know
how it is received (the source) and on
which programme number. The source
may be the built-in tuner of this recorder,
or an external receiver. The programme
number is the number on which the
channel can be found on its receiving
device/source. The entry in the Editor
screen must match this number for
correct recording of that channel.
• The above is especially important for the
'Host Channel'. Please make sure that
the Host Channel is always switched
ON.
38
En
2 Change the programme
numbers as you like.
Changing the programme numbers allows
you to decide the order in which the
channels change when stepping through
them sequentially. You can do this to group
certain channels together, for example.
Name
BBC1
BBC2
ITV
CH4
CH5
BBC3
ITV2
E4
UKGOL
3 When you're done, press the BLUE
Action button (Home) to get back to the
GUIDE Plus+ home screen.
• You can find detailed information on
using the GUIDE Plus+ system in the
following chapter.
On/Off Source Prog. No.
On D. TV 001
On D. TV 002
On D. TV 003
On D. TV 004
On D. TV 005
On Ext. Rec. 1 007
On D. TV 006
Off D. TV 014
On D. TV 017