Manual Clock Setting; Time Zone - Pioneer DVR-LX60D Operating Instructions Manual

Getting started
04
•

Manual clock setting

If no stations in your area are
broadcasting time signals, you can set
the clock manually.
Use the

time zone.

You can set this by selecting a city or a
time relative to GMT.
k Setting Manual Clock Setting
Line System
Time Zone
er Save
P
p Navigator p Navigator Summer Time
Press then use the
select 'On' or 'Off' for summer time,
then press ENTER.
Select On if you are currently using
summer time.
k Setting Manual Clock Setting
Line System
Time Zone
er Save
P
p Navigator p Navigator Summer Time
Set the date (day/month/year) and
time, then press ENTER to make all
the settings.
k Setting Manual Clock Setting
Line System
Date
er Save
P
Time
p Navigator p Navigator
Time Zone
Summer Time
• Use the
value in the highlighted field.
• Use the
field to another.
• You can go back to the previous screen
in the Setup Navigator by pressing
RETURN/EXIT.
32
En
buttons to set your
1/2
England
London
O ff
buttons to
1/2
England
London
O n
2/2
MON 01 / 01 / 2007
00 : 00
England
London
On
buttons to change the
buttons to move from one
ENTER
10 Select the EPG (Electronic
Programme Guide) type to use.
• GUIDE Plus+: Use the Gemstar GUIDE
Plus+ EPG (see also Setting up the
GUIDE Plus+® system on page 33 and
Using the GUIDE Plus+® electronic
programme guide on page 37).
• Digital EPG: Use the SI EPG
(programme information broadcast
together with digital channels).
• If no channels were found when
scanning for digital TV channels then
this screen does not appear and the EPG
is set according to the country set in step
7 above.
ENTER
11 Select the TV screen type,
'Wide (16:9)' or 'Standard (4:3)'.
k Setting TV Screen Size
Line System
er Save Wide (16:9)
P Standard (4:3)
p Navigator p Navigator
ENTER
12 Select whether or not your TV
is compatible with progressive scan
video.
k Setting Progressive
Line System
er Save Compatible
P Not Compatible Not Compatible
p Navigator p Navigator Don't Know
• Note that progressive scan video is only
output through the AV1 (RGB)-TV
connector and the component video
outputs.
13 Press to continue after reading
ENTER
the HDD caution.
k Setting In the event of HDD failure, recordings may
be lost or normal playback/recording may
Line System
not be possible.
er Save
As recordings might be lost in case of a HDD
P
failure, we recommend to use the HDD only
as temporary storage media.
p Navigator p Navigator
Please copy recordings you want to keep
to recordable DVD.
Press ENTER to continue.