Pioneer DVR-560HX-K Operating Instructions Manual page 49

Using the GUIDE Plus+® electronic programme guide
Changing the source and programme
number
1 Select 'Editor' from the Menu bar.
Name
BBC1
BBC2
ITV
CH4
CH5
BBC3
ITV2
E4
UKGOL
2 Highlight the right channel tile of the
channel you want to make a change to.
3 Press the RED Action button to
change the channel source, or the GREEN
Action button to enter a programme
number.
Each press of the RED Action button
changes the channel source (A.TV, D.TV,
Ext. Rec. 1, etc.). To set a programme
number, use the number buttons to enter a
programme number then press ENTER
(When set to A.TV or D.TV, make sure that
the programme number matches the preset
number of this recorder for what you want to
record).
Note
1 Making changes to the Country or Postal Code settings may require a new download of TV listings information.
This can take up to 24 hours.
Prog. No.
On/Off Source
On D. TV 001
On D. TV 002
On D. TV 003
On D. TV 004
On D. TV 005
On Ext. Rec. 1 007
On D. TV 006
Off D. TV 014
On D. TV 017
The Setup Area
The Setup Area is where you can set up the
GUIDE Plus+ system for your particular
region, TV reception conditions, and so on.
Making changes to your GUIDE Plus+
setup
1 Select 'Setup' from the Menu bar.
Press ENTER to access the Basic Setup screen.
Basic Setup
Host Channel Setup
GUIDE Plus+ System Information
2 Highlight the part you want to
change.
You can change the Language, Country,
1
Postal Code and the External Receiver
settings.
3 Press ENTER to confirm.
05
49
En