Decoder Box (1) - Pioneer DVR-560HX-K Operating Instructions Manual

Connections
Position the IR transmitter end of the
G-LINK™ cable so that the IR receiver on
your cable/satellite receiver will pick up the
control signals (see diagram).
G-LINK cable
See the manual that came with your cable/
satellite receiver if you're not sure where the
IR receiver is on the front panel.
Alternatively, experiment with the remote
control, operating it from very close range
until you find the place where the receiver
responds.
Tip
• This recorder has a 'through' function
which allows you to record a TV
programme from the built-in TV tuner in
this recorder while watching a video
playing on your VCR (To use this feature
when the recorder is in standby, Power
Save must be set to Off — see Power
Save on page 134).
Connecting an external

decoder box (1)

If you have an external, dedicated decoder
box for your satellite or cable TV system, use
the setup described on this page. See above
for how to connect the G-LINK™ cable.
Important
• Do not connect your decoder box directly
to this recorder.
• Information from the decoder (for
example, relating to pay TV services), is
only viewable when this recorder is off
(in standby).
• For timer recording to work properly on
this recorder, the VCR/satellite receiver/
cable box must also be switched on
during recording.
• It is not possible to watch one TV
O
S-VIDEO
INPUT 3
AV 2 (INPUT 1/DECODER)
G-LINK IN
CONTROL
AV 1 (RGB) – TV
OUTPUT
From SCART
AV connector
1
cable TV outlet to the antenna input on
your VCR/satellite receiver/cable box.
2
connect your decoder to your VCR/
satellite receiver/cable box.
See the manual for your decoder box for
more detailed instructions.
3
VCR/satellite receiver/cable box to the
AV2 (INPUT 1/DECODER) AV connector
on this recorder.
4
(RGB)-TV AV connector to your TV.
programme and record another using
this setup.
Antenna/cable TV
wall outlet
SCART AV
1
connection
To antenna
input
VCR/Satellite
receiver/Cable box
3
AV2 (INPUT 1/
DECODER)
AUDIO VIDEO
R L
ANTENNA
IN
S-VIDEO
INPUT 3
AV 2 (INPUT 1/DECODER)
5 V 30 mA
G-LINK
IN IN
OUT
Y P P CONTROL
B R ANTENNA(DIGITAL)
AV 1 (RGB) – TV
COMPONENT VIDEO OUT OUTPUT
AV1 (RGB) - TV
TV
Connect the cable from the antenna/
Use a SCART cable (not supplied) to
Use a SCART cable to connect your
Use a SCART cable to connect the AV1
2
Decoder
COAXIAL
AC IN
DIGITAL OUT
HDMI OUT
OUT
4
To SCART AV
connector
02
19
En