Pioneer DVR-560HX-K Operating Instructions Manual page 52

Using the GUIDE Plus+® electronic programme guide
05
• I used the One-Button-Record feature
(RED Action button) to set a recording,
but I recorded the wrong channel.
If the channel to be recorded is received
via the external receiver first make sure
that the external receiver was left
switched on. Next, in the Editor Area,
make sure that the channel to be
recorded is correctly set: Access the
Editor Area. Check the source and
programme number of the channel that
you wanted to record. Change the
source and preset numbers if incorrect.
If you are recording from the recorder's
internal tuner (the A.TV or D.TV setting),
make sure that the programme number
is the same as the preset number set on
this recorder. If they are different, go to
the Editor Area and change the
programme number to match the
recorder's preset number.
• The TV listings information doesn't
update.
The latest TV listings information is
automatically downloaded by the
recorder overnight. This only happens if
the recorder is in standby; if the recorder
is left on, it will not download. When not
using the recorder, please switch it into
standby.
Data downloads can take several hours.
The front panel display shows EPG when
downloading. If you switch the recorder
on while EPG is displayed, the download
will be cancelled.
• The GUIDE Plus+ system is not
supported in my area, but when I switch
the recorder into standby, after a while the
front panel display shows EPG. Can I stop
this from happening?
If the GUIDE Plus+ system is not
supported in your area, please do not set
the postal code in the GUIDE Plus+
setup (see Setting up the GUIDE Plus+®
system on page 35). When the GUIDE
Plus+ service starts in your area, please
set the postal code again.
52
En
• The automatic Host Channel search failed
or the GUIDE Plus+ system identified the
wrong Host Channel for my region.
You can identify your Host Channel
manually. See Manual Host Channel
setup on page 50 for how to do this.