Pioneer DVR-560HX-K Operating Instructions Manual page 156

Additional information
19
Problem
Timer programme
doesn't record
successfully
After briefly
unplugging or after a
power failure the front
panel display shows
'--:--'
Front panel display
shows 'LOCKED' when
a button is pressed
Can't use One Touch
Copy (HDD to DVD)
Can't use One Touch
Copy (DVD to HDD)
File names are not
displayed properly
Title searching in the
Gracenote database is
not possible
156
En
Remedy
• When setting the recording channel, make sure you set the
recorder's built-in TV tuner, not the TV's built-in tuner.
• When recording to a DVD-R/-RW (Video mode) or DVD+R/+RW,
programmes that are copy-once protected cannot be recorded. Use a
VR mode formatted disc for copy-once material (page 62).
• Two timer programmes may have overlapped, in which case only the
earlier one will record completely.
• The power may have failed during recording.
• A backup battery inside the recorder keeps the clock and other
settings from being reset when there is no power to the recorder. After
unplugging or a power failure, the battery keeps all settings for a
period of several minutes. Reset the clock and other recorder settings
to use the recorder again.
• The child lock is on; turn off in order to use the recorder (page 70).
• Make sure that there is a recordable DVD-R/-RW loaded with some
free space for recording and fewer than 99 titles already on the disc.
Also make sure that for a DVD-R/-RW (Video mode) or a DVD+R, the
disc isn't finalized.
• Make sure there is a recordable DVD+R/+RW loaded with some
free space for recording and fewer than 49 titles already on the disc.
• If you delete a title from a DVD+R/+RW disc, the number of
remaining recordable titles may not decrease.
• Further recording is not possible on a finalized DVD+R. Check that
there isn't a disc menu on the disc you're trying to use.
• If the title currently playing contains material that is copy-once
protected, One Touch Copy will not work.
• If the currently playing HDD content was recorded in XP+ mode, the
One Touch Copy feature can't be used.
• One Touch Copy can't be used for titles over eight hours long when
copying to DVD+R/+RW (though you can use a DVD+R DL).
• One Touch Copy can't be used for MN1 to MN6, SEP , SLP or EP titles
when copying to DVD+R/+RW.
• One Touch Copy doesn't work if the recorder is already recording to DVD.
• Make sure that there is space available on the HDD and that there
are fewer than 999 titles on the HDD.
• One Touch Copy doesn't work if the recorder is already recording to
the HDD.
• Files names that do not conform to the ISO8859-1 standard may not
display correctly on this unit.
• Title searching is not possible when the HDD Sleep Mode is set
(page 146).