Troubleshooting; Programme Guide - Pioneer DVR-560HX-K Operating Instructions Manual

Using the GUIDE Plus+® electronic programme guide
05
Manual Host Channel setup
The GUIDE Plus+ system will automatically
identify your Host Channel as soon as the
recorder is put into standby for the first time.
See the table on page 37 for a list of all the
European Host Channels.
If you know your Host Channel details
(source and programme number) or if the
automatic identification did not provide the
expected result, you can identify your Host
Channel manually. Select Host Channel
Setup in the Setup area and follow the
instructions on the TV. Select the correct
source (e.g., internal tuner or external
receiver) and enter the respective
programme number (e.g., if you have to
press 9 on the remote to watch your Host
Channel, enter 9 as the programme
number). When you next switch the recorder
into standby the GUIDE Plus+ system will
complete the Host Channel setup.
You can reset the Host Channel settings at
any time back to the default setting of
automatic. Please be aware that resetting
the Host Channel will erase all TV listings
data.
50
En
®
GUIDE Plus+ FAQ and

troubleshooting

This FAQ covers only a few questions. For a
complete list please consult the GUIDE
Plus+ website at:
www.europe.guideplus.com
FAQ
• When I tried setting up my external
receiver I could not get any of the
attempts to work, what should I do?
There could be several reasons why your
external receiver could not be controlled.
– The connections could be wrong. Make
sure that the G-LINK cable is connected
to the G-LINK connector on the recorder
and the IR blaster is in front of the
external receiver, pointing towards the IR
receiver of your external receiver. See
Connecting to a cable box or satellite
receiver on page 18.
– The code that is listed under your
brand could be wrong. Please try other
codes for your brand under satellite,
cable or terrestrial. Go to the Setup Area
and choose one of the three options
(cable, satellite or terrestrial) that you
have not already tried. Follow the on-
screen prompts to make sure that the
GUIDE Plus+ system can change
channels on your external receiver. If it
does not work, repeat the process,
choosing different reception and
external receiver combinations until you
have tried all the codes for your brand of
receiver that are already in the GUIDE
Plus+ system. If it still does not work,
see below on how to receive new codes
overnight.
– The unit has not yet received new
codes. The nightly data downloads
frequently include new codes for
controlling external receivers. Please
tune your external receiver to your local
Host Channel and leave it on overnight.