Pioneer DVR-560HX-K Operating Instructions Manual page 46

Using the GUIDE Plus+® electronic programme guide
05
7 Press the GREEN Action button
(Frequency) to change the recording
frequency.
Select from the various options for one-time,
daily and weekly recordings.
8 Press YELLOW Action button
(Destination) to select the recording
destination.
Select from DVD, HDD or HDDr (Auto
Replace Recording)
Note
1 • For a DVD timer recording, if Optimized Rec (see Optimized Rec on page 141) is set to On (and VPS/PDC is
off), the recorder will adjust the recording quality to try and fit the recording on the disc. If the recording will not
fit onto the disc even on MN1 recording quality (MN4 for DVD+R/+RW) then the Recovery Recording feature
will automatically make the recording to the HDD instead.
• If there is very little free space left on the HDD, an Auto Replace Recording may not complete successfully.
• If the HDD is being used for playback or high-speed copying when an Auto Replace Recording is due to start,
the new timer recording will not replace the old one. However, the next time the timer recording starts, both of
the older two programmes will be erased.
2 • If you set the timer recording to use VPS/PDC, you must switch the recorder into standby before the timer
recording is due to start for it to work correctly. For non-VPS/PDC timer recordings there is no need to switch
the recorder into standby.
• Optimized Recording will not work if VPS/PDC is on.
• Up to eight timer recordings can be set with VPS/PDC.
• VPS/PDC cannot be set for recordings made from digital broadcasts or an external input, or when the
46
recording mode is set to AUTO.
En
1
.
• Auto Replace Recording is only available
as an option with regular daily or weekly
recordings.
Press  to access the extended
9
recording options.
• If you want to record to a particular HDD
genre, use the YELLOW Action button
(Genre) to select one.
• Use the GREEN Action button (Timing)
to add extra time to the end of the
recording (+0, +10, +20, +30 or VPS/
2
PDC (V–P)).
• Press  to display the standard
recording options again.