Table of Contents
Advertisement
Make a 01:01 AM copy of a CAD drawing
The 'Copy' tab is automatically activated on the user panel.
Note:
The description of the first default copy template is displayed ('1:1 copy, CAD drawing').
With a copy template you can pre-define the settings you need for a copy job. You only
need to set the job settings once and you can store the settings in a job template that is
presented on the user panel. You can re-use the job template for each next job without
the need to redefine all the settings every time. (see
copy templates' on page
Press the green button.
2.
Note:
Depending on the selected 'Original release mode' in the Océ Express WebTools, the
scanner holds or releases the original after the scan procedure.
84
Chapter 3 - Quick start
162).
'Define the copy job preferences and
Advertisement
Table of Contents
