Table of Contents
Advertisement
•
Feed the next original, define the settings for this original if necessary and press the
green button.
You can use the lower right soft key to return to the default settings of your copy
template.
Repeat this step until all originals are fed.
Select 'Close set' with the lower left soft key.
4.
How to make multiple sets of copies sorted by page
Feed the first original face up.
1.
The scanner takes the original.
Open the 'Copy' tab with the confirmation button above the scroll wheel.
2.
Define the job settings.
3.
•
Open a template with the confirmation button.
The 'Create set' option appears at the lower left corner of the screen.
•
Select 'Create set' with the lower left soft key.
The 'Close set' option appears at the lower left corner of the screen.
•
Scroll to 'Sort', define 'By page' and confirm with the with confirmation button. This
setting is disabled after you press the green button for the first time.
•
Press'OK'.
•
Change the settings for your first original if necessary.
•
Define the number of copies and press the green button.
You can not change the number of copies after you press the green button for the first
time.
•
Feed the next original, define the settings for this original if necessary and press the
green button.
You can use the lower right soft key to return to the default settings of your copy
template.
Repeat this step until all originals are fed.
Select 'Close set' with the lower left soft key.
4.
Result
The Océ PlotWave 350 copies a set of originals sorted by set or by page.
Make multiple sets of copies
Chapter 5 - Use the printing system
233
Advertisement
Table of Contents
