Table of Contents
Advertisement
Make a copy and delete a specific area of an original
#
The 'Hor offset'
•
Open a template with the confirmation button.
•
Scroll to 'Erase area' and open this setting with the confirmation button.
•
Scroll to 'Hor offset', define the value with the scroll wheel or numeric keys and con-
firm.
•
Scroll to 'Vert offset', define the value with the scroll wheel or numeric keys and
confirm.
•
Scroll to 'Width', define the value with the scroll wheel or numeric keys and confirm.
•
Scroll to 'Length', define the value with the scroll wheel or numeric keys and confirm.
•
Press 'OK'
Define the number of copies and press the green button.
4.
Result
The Océ PlotWave 350 copies an original without the specified area.
246
Chapter 5 - Use the printing system
The 'Vert offset'
The 'Width'
The 'Length'
Advertisement
Table of Contents
