Table of Contents
Advertisement
•
The system administrator enters the configuration information in the printer controller
interface (Océ Express WebTools, see
connection' on page
(connection sheet - see
Response Card' contains the information to connect to the Océ Mobile WebTools
and the QR Code.
•
The user activates Wi-Fi on the mobile device and connects to the network. The user
then opens the Océ Mobile WebTools on the mobile device's web browser (see
your mobile device to the Océ Mobile WebTools' on page
•
Using the Océ Mobile WebTools, the user can then print a file from the mobile device
to the Océ PlotWave 350 (see
scanned document onto the mobile device (see
device' on page
257).
Chapter 4 - Define your workflow with the Océ Express WebTools
'Configure the Océ Express WebTools for a mobile
148) in order to generate and print the 'Quick Response Card'
'Generate the 'Quick Response Card' ' on page
'Print from your mobile device' on page
Océ Mobile WebTools
199).
'Save a scanned document to your mobile
150). This 'Quick
'Connect
201) and save a
147
Advertisement
Table of Contents
