Table of Contents
Advertisement
Note:
You do not need to center the original precisely when 'Width detect' is set to 'Auto'. The
exact position of the original is automatically detected by the scanner.
When 'Width detect' is set to 'Standard' or 'Custom', feed the original between the
markers or exactly centered.
The scanner takes the original.
2.
Press the green button twice.
3.
You can double-click the green button or wait for the green button to light up for the
second time. As long as the operator panel displays the dialog 'Press green button again
to activate auto-feed' you can activate this functionality.
Note:
You can de-activate the auto-feed functionality by pressing the green button once more.
Wait for the operator panel to display 'Auto-feed next original' before feeding the next
4.
original.
Auto-feed the original
Chapter 5 - Use the printing system
213
Advertisement
Table of Contents
