Operation Mode - Olivetti ECR 7900 User Manual

Menu Item
ECR NUMBER
KEY TONE
RECEIPT MODE
WINDING MOTOR
O M
PERATION ODE
In this form you can specify options affecting financial transactions such as VAT rates, and other system options.
Programming Mode -> Configuration Setup -> Operation Mode
Select
enter its data (see "Data Entry Mode" for the keys to use). At the end, press
to return to the previous menu.
NOTE: Before changing a VAT rate it is recommended that you first print a Z Financial report (see "X and Z
Reports"). For other VAT-related features, see "Printing VAT Information on Customer Receipts".
Menu Item Possible Values
VAT Calc VAT, ADD-ON
Mode
Tax1 Rate (Numeric)
Tax2 Rate (Numeric)
Tax3 Rate (Numeric)
Tax4 Rate (Numeric)
FC Conv Type DIVIDE,
MULTIPLY
%& +/- DEP NET, BRUT
CALC
0 Price Reg YES, NO
Post Tender YES, NO
Decimal 0, 1, 2, 3
Rounding DOWN, UP, OFF
16
Possible Values Description
(Numeric) Enter a 4-digit Cash Register Identification Number. This number is
printed on the sales receipts, journal records and management reports
issued by the cash register. It is useful to identify the cash register when
more than one cash register is used in the business.
YES, NO Key touch-tone audible signal: YES - Enable, NO - Disable.
RECEIPT, RECEIPT = Print receipts, JOURNAL - Save data in journal only, no receipt
JOURNAL printing.
EJ RPT, Paper winding motor activation: EJ RPT - Motor is activated only when EJ
PG/X/Z report is being printed, PG/X/Z - Motor is activated during Programming,
X and Z modes.
Description
Tax rate to apply to calculations: ADD-ON - Add-on tax rate, VAT - Value
Added Tax.
Enter a 5-digit number to represent the VAT rate to associate with Tax Rate 1
- THREE digits come after the decimal point.
The same criteria apply as for entering Tax 1 rate.
The same criteria apply as for entering Tax 1 rate.
The same criteria apply as for entering Tax 1 rate.
DIVIDE = Use division for foreign currency conversion calculation, MULTIPLY =
Use multiplication for foreign currency conversion.
Assign +/- and %+/- results to departments.
Allow zero prices to be registered. YES - Enable, NO - Disable.
Allow other transactions to be entered after tender has been registered. YES
- Enable (default), NO - Disable.
Set the number of digits after the decimal point. Enter 1 digit for the decimal
position. For example, if 2 is specified, the format used for decimal numbers is
to two decimal places: x.xx
Activate fraction rounding in calculations. Fraction rounding is used to round
figures with decimals up or down to the nearest whole numbers, and is used
for percent tax and percent discount calculations. UP - a fraction of one pence
is rounded up one pence, DOWN - a fraction of one pence is rounded down
one pence, OFF - a fraction over half a pence is rounded up, a fraction equal
to or under half a pence is rounded down.
. Navigate to the field you want to personalize and
to return to the Main menu,or