Olivetti ECR 7900 User Manual page 34

Menu Item Description
Chain Functions You can associate a 5-key sequence with each of the chain functions from
[CHAIN FUNCTION1] to [CHAIN FUNCTION5] to simplify and speed up the entry of repetitive
cash register operations. As the [CHAIN FUNCTIONx] keys are not provided by default on the
keyboard, you must first of all map the key you want to use onto a key as described in Free
Key Layout above. You can then program the key sequence that must be executed whenever
the [CHAIN FUNCTIONx] key is pressed. How to do this is explained by means of an example
below.
Example: Let's assume that [CHAIN FUNCTION1] is mapped onto the key
a cash payment of £10.00 every time this key is pressed:
1. Select
2. Press
3. Enter the key sequence by pressing:
4. Press
While programming a chain function, the keys
Chain Report You can program 5 chain reports. For each report, you can select the entities to be included by
changing their values from NO to YES for: Department & Financial, Department Group, All
PLUs, Sales Clerk, Training Clerk, Hourly Report, Training, Dept & Financial Grand Total, Full EJ.
Manager See below.
Password
Setting Up Manager Passwords
Programming Mode -> Configuration Setup -> Advanced settings->Manager Passwords
Select
want to personalize and enter its data (see "Data Entry Mode" for the keys to use). At the end, you can press
return to the Main menu or
Menu Item Possible Values
PRG & Z Mode 0000 to 9999
X Mode 0000 to 9999
24
Programming Mode -> Configuration Setup -> Advanced settings
.
.
again
NOTE: The [CHAIN FUNCTIONx ] keys themselves cannot be used in a chain function,
nor can the following:
, , ,
to return to the previous menu.
Description
4-digit password to protect access to PRG & Z mode. Default: 0000 (not
activated).
A single management password can be set up to control use of
Programming functions and printing of financial reports in Z mode.
Programming Mode is used to set up and program the cash register, so
password controlled access may be necessary in multiuser environments.
Management reports taken in the Z mode reset the transaction totals to
zero, so setting up a password can guarantee against accidental resetting of
these totals by unauthorized personnel.
4-digit password to protect access to X mode. Default: 0000 (not activated).
A management password can be set up to control printing of financial
reports in X mode so as to safeguard the confidentiality of transaction report
data.
, , , ,
and
. To
Chain Functions
->
.
, , , ,
cannot be used.
. Navigate to the field you
register
.
.
to