Motion Detection Menu - Bosch VDC-275 Installation Manual

Indoor Dome Camera
6.8

Motion detection menu

Select OFF or ON for motion detection.
Detect sense: select between 0 and 127.
Block display: select ON, OFF or ENABLE . Press the center
(menu) button in ENABLE mode to access the 84 (12 x 8)
blocks. To return to previous page press the center (menu)
button for 5 seconds and then release it.
Monitor area: select OFF or ON.
Area select: select between 1/4(pink), 2/4(green), 3/4(purple)
or 4/4(yellow).
–
–
–
–
Bosch Security Systems
Top: extend or reduce the upper limit of the detection area
( 0 to 244 for NTSC; 0 to 288 for PAL).
Bottom: extend or reduce the bottom limit of the detection
area ( 0 to 244 for NTSC; 0 to 288 for PAL).
Left: extend or reduce the left limit of the detection area (
0 to 474 for NTSC; 0 to 468 for PAL).
Right: extend or reduce the right limit of the detection
area ( 0 to 474 for NTSC; 0 to 468 for PAL).
LEFT
BOTTOM
Installation Manual
TOP
1
RIGHT
Camera menus | en
reduce RIGHT extend
1
AM18-Q0609 | v1.0 | 2012.01
27