Table of Contents
Advertisement
32
en | Basic Mode
5.4
Encoder
Select a profile for encoding the video signal on stream 1 (this
is not a selection of the recording profile).
Pre-programmed profiles are available that give priority to
different parameters and they should be selected based on
your operating environment.
When a profile is selected, its details are displayed.
5.5
Audio
(only for cameras with microphones)
Switch the camera audio On or Off.
Use the slider to adjust the level.
5.6
Recording
(only for cameras with storage)
Record the images from the camera to a storage medium. For
long-term authoritative images, it is essential to use VRM or an
appropriately sized iSCSI system.
Storage medium
1.
2.
5.7
System Overview
This page provides general information on the hardware and
firmware system, including version numbers. No items can be
changed on this page but they can be copied for information
purposes when troubleshooting.
AM18-Q0635 | v5.6 | 2013.01
Select the required storage medium from the list.
Click Start to start recording or Stop to end recording.
Software manual
Camera Browser Interface
Bosch Security Systems
Advertisement
Table of Contents
