Table of Contents
Advertisement
Camera Browser Interface
3.1.9
Running recording program
The hard drive icon below the camera images on the Livepage
changes during an automatic recording.
The icon lights up and displays a moving graphic
indicate a running recording. If no recording is taking place, a
static icon is displayed.
3.1.10
Audio communication
Audio can be sent and received via the Livepage if the active
monitor and the remote station of the camera support audio.
1.
2.
All connected users receive audio signals sent from the camera
but only the user who first pressed the F12 key can send audio
signals; others must wait for the first user to release the key.
3.1.11
Processor load
When accessing the camera with a browser, the processor load
and network information is available in the upper right of the
window next to the Bosch logo.
Move the mouse cursor over the icons to display numerical
values. This information can help with problem solving or when
fine tuning the device.
Bosch Security Systems
Press and hold the F12 key on the keyboard to send an
audio signal to the camera.
Release the key to stop sending audio.
Software manual
Operation via the browser | en
AM18-Q0635 | v5.6 | 2013.01
21
to
Advertisement
Table of Contents
