Table of Contents
Advertisement
Camera Browser Interface
6.3
Date/Time
6.3.1
Date format
Select the required date format.
6.3.2
Device date / Device time
If there are multiple devices operating in your system or
network, it is important to synchronize their internal clocks. For
example, it is only possible to identify and correctly evaluate
simultaneous recordings when all devices are operating on the
same time.
1.
2.
Note:
It is important that the date/time is correct for recording. An
incorrect date/time setting could prevent correct recording.
6.3.3
Device time zone
Select the time zone in which the system is located.
6.3.4
Daylight saving time
The internal clock can switch automatically between normal
and daylight saving time (DST). The device already contains the
data for DST switch-overs up to the year 2041. Use this data or
create alternative time saving data, if required.
Note:
If a table is not created, there is no automatic switching. When
editing the table, note that values occur in linked pairs (DST
start and end dates).
Bosch Security Systems
Enter the current date. Since the device time is controlled
by the internal clock, it is not necessary to enter the day of
the week – it is added automatically.
Enter the current time or click Sync to PC to apply the
system time from your computer to the device.
Software manual
Advanced General Settings | en
AM18-Q0635 | v5.6 | 2013.01
35
Advertisement
Table of Contents
