ASSEMBLY
Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the packing
materials. Do not dispose of the packing materials until assembly is completed.
Assembly requires the included tools and your own adjustable spanner
Use the drawings below to identify the small parts used in assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST on page 26. The number following the parentheses
is the quantity needed for assembly. Note: Some small parts may have been preattached for shipping. If a
part is not in the parts bag, check to see if it has been preassembled.
M8 x 25mm Patch
Screw (59)–4
M8 Split Washer
(55)–18
1. Identify the Front Stabiliser (15). Whilst another person
lifts the front of the Frame (1), attach the Front
Stabiliser to the Frame with four M8 x 40mm Button
Screws (54) and four M8 Split Washers (55).
M8 x 40mm Button
Screw (54)–12
Upright Spacer
(30)–3
1
15
5
.
M4 x 16mm
Screw (57)–4
M8 Nylon Locknut
(38)–4
1
55
55
54
54