Healthrider Health Rider R1000t Bike User Manual page 22

HOW TO USE IFIT.COM CD AND VIDEO
PROGRAMS
To use iFIT.com CDs or videocassettes, the exercise
cycle must be connected to your portable CD player,
portable stereo, home stereo, computer with CD play-
er, or VCR. See HOW TO CONNECT YOUR CD
PLAYER, VCR, OR COMPUTER on pages 19 to 21.
To purchase iFIT.com CDs or videocassettes, call
the telephone number on the front cover of this
manual.
Follow the steps below to use an iFIT.com CD or
video program.
Begin pedaling to activate the console.
1
See step 1 on page 13.
Select the iFIT.com mode.
2
To select the
iFIT.com mode,
press the iFIT but-
ton. The indicator
above the button
will light.
Insert the iFIT.com CD or videocassette.
3
If you are using an iFIT.com CD, insert the CD into
your CD player. If you are using an iFIT.com
videocassette, insert the videocassette into your
VCR.
Press the play button on your CD player or
4
VCR.
A moment after the play button is pressed, your
personal trainer will begin guiding you through
your workout. Simply follow your personal trainer's
instructions.
The program will function in almost the same way
as a resistance and pace program (see step 3 on
page 15). However, an electronic "chirping" sound
will alert you when the resistance setting and/or the
target pace setting is about to change.
Note: If the resistance of the pedals and/or the
target pace setting does not change when a
"chirp" is heard:
• Make sure that the indicator above the iFIT
button is lit.
• Adjust the volume of your CD player or VCR.
If the volume is too high or too low, the con-
sole may not detect the program signals.
• Make sure that the audio cable is properly
connected and that it is fully plugged in.
Monitor your progress with the matrix and the
5
two displays.
See step 4 on page 13.
Measure your heart rate if desired.
6
See step 5 on page 14.
Turn on the fan if desired.
7
See step 6 on page 14.
When you are finished exercising, the console
8
will automatically turn off.
See step 7 on page 14.
22