Table of Contents
Advertisement
Turning off the system drawer
To turn off the system drawer:
1
Close all programs.
2
If necessary, issue a "flush" command to write the contents of any caches
or buffers to disk.
3
If necessary, issue a command to exit or quit the operating system.
4
Press the on/off switch on the system drawer.
5
Turn off any other devices connected to the system drawer.
Securing the system drawer in the
cabinet
To secure the system drawer:
1
Close the back door of the system cabinet, then lock it if necessary.
2
Push the system drawer all the way back into the cabinet until the front
panel presses against the front vertical mounting rails.
3
Secure the system drawer to the front vertical mounting rails using four
screws from the accessory kit.
4
Close the front cabinet door, then lock it if necessary.
20
Installation
Advertisement
Table of Contents
