Installing The System Drawer Side Rails - Gateway 7250R Rack Mounting Instructions

Installing the system drawer side rails

Before installing the server (system drawer) in the cabinet, you need to install
the system drawer side rails on the server.
To install the system drawer side rails:
1
Remove the system drawer side rails from the cabinet mounting rails by
depressing the retention clips on the inside of the system drawer side
rails, then sliding the rails off.
Retention clip
2
Mount the system drawer side rail on the server using three screws from
the accessory kit. Make sure the retention clips are toward the back of
the server.
3
Mount the second rail on the opposite side of the server.
2
Installation
Retention clip
System drawer
side rail