Gateway E-9425R User Manual page 62

16
17
18
19
20
21
56
CHAPTER 4: Installing Components
Reinstall the PCI riser assembly by following the instructions in
PCI expansion cards" on page
Reinstall the system fans and fan cage by following the instructions in
fans" on page 41.
Follow the instructions in
Turn on your server, then press F2 when the Gateway logo screen appears during startup.
The BIOS Setup utility opens.
Check BIOS settings to make sure that they detect the server's new hardware, then save
your changes (if any) and close the BIOS Setup utility.
If your server does not start after installing the new system board, contact Gateway
Customer Care. For more information, see
39.
"Closing the server case" on page
"Getting Help" on page
"Installing and removing
"Replacing system
30.
8.