Gateway 7210 System Manual page 128

Error message
Not enough memory
Print queue is full
Printer is out of paper
Required parameter
missing
Syntax error
Time and date not set
Write protect error
Solutions
Close all programs that are not currently in
use.
Wait until the current print job has completed
before sending another print job.
If you receive this error often, you need to add
memory to the printer.
Add paper to the printer.
Make sure that the printer is online.
Make sure that you entered the right
command.
If you are trying to exit MS-DOS to return to
Windows, type exit, then press E
Make sure that you entered the right
command.
If you are trying to exit MS-DOS to return to
Windows, type exit, then press E
Open the BIOS Setup utility, then set the
system date and time.
Move the write-protection tab over the hole on
the back of the diskette.
.
NTER
.
NTER
Error messages
121