Table of Contents
Advertisement
Figure 1: TP-121EDID XGA/Audio Line Transmitter
#
1
EDID
2
3
ON LED
4
XGA IN 15-pin HD (F)
5
LINE OUT RJ-45
6
AUDIO IN 3.5mm mini jack
7
12V DC
4.2
Connecting the TP-121EDID XGA/Audio Line
Transmitter
You can use the TP-121EDID together with the TP-122N to configure a twisted
pair transmitter and receiver system, to transmit the video and audio signals via
CAT 5 cable.
i
TP-121/3/5EDID, PT-110EDID - Your TP-121EDID
Feature
CAPTURE Button
STATUS LED
connector
connector
Before connecting the transmitter and receiver system you can
acquire the EDID from the display or set the system to the default
EDID, see
Section
Press to capture the EDID information from the
display
Illuminates during normal operation; flashes when
acquiring the EDID
Illuminates when receiving power
Connects to the XGA source
Connects to the LINE IN RJ-45 connector on a
receiver
Using a CAT 5 cable with RJ-45 connectors at both
ends (the PINOUT is defined in
Connects to the audio source
+12V DC connector for powering the unit
9.
Function
Section
8)
7
Advertisement
Table of Contents
