Your Tp-107Avr Xga/Audio Line Transmitter; Figure 2: Tp-107Avr Xga/Audio Line Transmitter; Table 4: Tp-107Avr Xga/Audio Line Transmitter Features - Kramer RC-116 User Manual

Your Line Transmitter, Receiver and Presentation Controllers
4.1

Your TP-107AVR XGA/Audio Line Transmitter

Figure 2 and

Table 4: TP-107AVR XGA/Audio Line Transmitter Features

# Feature
1 K-NET Terminal Block
Connector
2 LINE OUT RJ-45 Connector
3 ADDRESS Selectors
4
5 K-NET TERM Switch
6 LINE IN RJ-45 Connector
7 K-NET Terminal Block
Connector
8 XGA IN 15-pin HD Connector
9 Audio IN 3.5mm Mini Jack
10 Remote 3.5mm Mini Jack
11 ONLINE Button
12 ONLINE LED
13 ON LED
1 The 12V DC power supply (not provided) is used to power the system (see
2 Using CAT 5 cable with RJ-45 connectors at both ends (the PINOUT is defined in
3 For example, the Kramer TP-122. You can download this user manual at:
4 From 1 to 256 (see section 5.6)
8
Table 4 define the TP-107AVR:

Figure 2: TP-107AVR XGA/Audio Line Transmitter

Connect to the previous or next line transmitter or to a control device.
GND is for the ground connection; B (-) and A (+) are for RS-485,
and +12V is for powering the unit
Connects to
next line transmitter
Rotate to select the address number
Set the switch to ON to terminate the K-NET line with 120Ω
Connects to
transmitter
Connect to the previous or next line transmitter or to a control device.
GND is for the ground connection; B (-) and A (+) are for RS-485,
and +12V is for powering the unit
Connects to the XGA source
Connects to the audio source
Connect to an external button for easy on-line connection (for
example, when the unit is installed under the table). For the pinout,
see section
Press to access priority
Lights when gaining priority
Lights when receiving power
Function
1
2
the LINE IN RJ-45 connector on the receiver
2
the LINE OUT RJ-45 connector on the previous line
1
7
Table 2)
Table 9
http://www.kramerelectronics.com
KRAMER: SIMPLE CREATIVE TECHNOLOGY
3
4
and Figure 12)
or the