Xga line transmitter / da cat5 line driver / da xga / audio line transmitter xga / audio line receiver xga / audio / data line transmitter xga / audio / data line receiver (27 pages)
Figures Figure 1: TP-114 1:4 XGA / HD DA /CAT5 Transmitter Figure 2: TP-114 1:4 XGA / HD DA /CAT5 Transmitter (Top Side Panel) Figure 3: TP-114 1:4 XGA / HD DA /CAT5 Transmitter (Lower Side Panel) Figure 4: TP-114 1:4 XGA / HD DA /CAT5 Transmitter (Underside Panel) Figure 5: Configuring a TP-114 XGA / HD Line Transmitter –...
GROUP 6: Accessories and Rack Adapters; GROUP 7: Scan Converters and Scalers; and GROUP 8: Cables and Connectors 2 Download up-to-date Kramer user manuals from the Internet at this URL: http://www.kramerelectronics.com 3 The complete list of Kramer cables is on our Web site at http://www.kramerelectronics.com Introduction...
Page 4
Getting Started KRAMER: SIMPLE CREATIVE TECHNOLOGY...
The power connect feature, see section 3.1 Using shielded twisted pair (STP) / unshielded twisted pair (UTP), see section 3.2 A summary of the TP-114, see section 3.3 Recommendations for achieving the best performance, see section 3.4 3.1 About the Power Connect Feature The Power Connect feature lets you power a transmitter / receiver system by connecting just one power adapter—...
1 The terminology XGA is used throughout this manual, where this implies any RGBHV signal on an HD15 connector having a resolution from VGA up to UXGA 2 The TP-114 accepts high definition resolutions: 480p, 576p, 720p, 1080i, and 1080p 3 Note that the CAT5 connectors exclude audio...
Figure 1, Figure 2, Figure 3 and Table 1 define the TP-114: Figure 1: TP-114 1:4 XGA / HD DA /CAT5 Transmitter Figure 2: TP-114 1:4 XGA / HD DA /CAT5 Transmitter (Top Side Panel) Figure 3: TP-114 1:4 XGA / HD DA /CAT5 Transmitter (Lower Side Panel)
ON LED Figure 4 and Table 2 define the TP-114 underside panel: Figure 4: TP-114 1:4 XGA / HD DA /CAT5 Transmitter (Underside Panel) Table 2: TP-114 1:4 XGA / HD DA /CAT5 Transmitter (Underside Panel) Features Feature Function VS Switch...
DA /CAT5 Transmitter system. This will let you transmit a computer graphics / HD signal to four displays via long line CAT5 UTP cabling. To connect the TP-114 to four TP-120 units, as the example in Figure 5 illustrates, do the following: 1.
Configuring a TP-114 XGA / HD Line Transmitter – DA System 5. On the TP-114, if necessary, set the VS and HS switches on the underside Figure 5: Configuring a TP-114 XGA / HD Line Transmitter – DA 1 By default, both switches are set down (to NORMAL) to retain the VS and HS polarity...
Configuring a TP-114 XGA / HD Line Transmitter – DA System 5.1 Wiring the CAT5 LINE IN / LINE OUT RJ-45 Connectors Table 3 and Figure 6 define the UTP CAT5 PINOUT, using a straight pin to pin cable with RJ-45 connectors:...
Technical Specifications Table 4 includes the technical specifications Table 4: Technical Specifications of the TP-114 (with 100m CAT5 cable) INPUT: OUTPUTS: MAX. OUTPUT LEVEL: HIGHEST RESOLUTION DIFF. GAIN DIFF. PHASE K-FACTOR S/N RATIO CONTROLS COUPLING POWER SOURCE: DIMENSIONS: WEIGHT: ACCESSORIES:...
Page 13
EXCLUSION OF DAMAGES The liability of Kramer for any effective products is limited to the repair or replacement of the product at our option. Kramer shall not be liable for: Damage to other property caused by defects in this product, damages based upon inconvenience, loss of use of the product, loss of time, commercial loss;...
Page 14
For the latest information on our products and a list of Kramer distributors, visit our Web site: www.kramerelectronics.com, where updates to this user manual may be found. We welcome your questions, comments and feedback. Safety Warning: Disconnect the unit from the power supply before opening/servicing.
Need help?
Do you have a question about the TP-114 and is the answer not in the manual?
Questions and answers