Loading Suggestions - Kenmore AUTOMATIC WASHERS Owner's Manual And Installation Instructions

LOADING
Proper loading of your washer
contributes to proper cleaning and
fabric care and reduces machine
noise.
Drop items into washer loosely. Fill to
the top of the basket (top row of holes).
Do not wrap items around the agitator.
Items should move easily through
wash water for best cleaning and
wrinkle-free results. Items should sink
and reappear later.
Load washer properly and select
correct water level setting. Overloading
or packing the machine, and selecting a
setting too small for the wash load can:
= cause poor cleaning
= increase wrinkling
= create excessive lint
= wear out items faster
(because of pilling)
Load by the amount of space items
take up, not by their weight.
Mix large and small items in each load.
Load evenly to maintain washer
balance. An off-balance load can make
the washer vibrate during spin.
Use a higher water level setting to
reduce wrinkling with permanent press
clothes and some synthetic knits.
These items should have more room
to move in the water than heavy items
(towels, jeans).
Reduce wash time by using a lower
water level setting. Loads with only a
few small items need less wash time.
LOADING SUGGESTIONS
For these suggested full-sized loads,
set the Water Level Selector to the
highest water level setting.
Super Capacity Plus Washers
Heavy Work
Clothes
4 jeans
4 workpants
4 workshirts
2 sweatshirts
2 sweatpants
Towels
10 bath towels
10 hand towels
14 wash cloths
Mixed Load
3 sheets
(1 king, 2 twin)
4 pillowcases
3 shirts
3 blouses
9 T-shirts
9 shorts
10 handkerchiefs
33