Kenmore AUTOMATIC WASHERS Owner's Manual And Installation Instructions page 18

F. SECURE DRA(N HOSE
Securing the drain hose properly will
protect your floors from damage due
to water leakage.
STEP 1. Move washer to its final
location.
If the water faucets and drain standpipe
are recessed, put hooked end of drain
hose in standpipe, Tightly wrap the
shipping strap around the drain hose
and water inlet hoses (not the handles
or stems), Push fastener into the
nearest hole in the shipping strap,
i
)
I
STEP 2. Locate the remaining piece
d shipping strap (not the end with the
three cotter pins) from STEP 4 d
"REMOVE SHIPPING STRAP." Use
it to wrap the drain hose together with
the laundry tub or standpipe. Push
fastener into the nearest hole in the
shipping strap.
Fastener
18