Kenmore AUTOMATIC WASHERS Owner's Manual And Installation Instructions page 27

RINSE OPTIONS CONTROL
A second rinse will remove more
detergent residue. It is especially
beneficial if extra detergent has been
used to remove heavy soils.
AUTOMATIC 2ND RINSE
Your washer allows you to add an auto-
matic second rinse to the ULTRA CLEAN
Cycle or PERMANENT PRESS Cycle.
Simply set the RINSE OPTIONS Control
on 2ND RINSE before you start the
washer. You won't have to come back to
select a second rinse.
ONE 2ND
RINSE RINSE
® •
@
RINSE AND SPIN
When using extra detergent for heavily
soiled clothes, or washing special-care
items, you may find an extra rinse and
spin is needed.
STEP 1. Set WATER LEVEL Control.
STEP 2. Set WATER TEMPERATURE
Control.
STEP 3. Set RINSE OPTIONS Control
to ONE RINSE.
STEP 4. Set SPEEDS Control:
For fast agitation and spin,
use the HEAVY DUTY setting.
For slow agitation and spin,
use the EXTRA DELICATE setting.
For stow agitation and fast spin,
use the REGULAR setting.
STEP 5. Set the Cycle Selector Control
(Timer) knob to a RINSE setting.
STEP 6. Pull Cycle Selector Control
(Timer) knob out to start washer.
ULTRA CLEAN
PREWASH
SOAK q
SPIN ONLY
A drain and spin may help shorten
drying times for some heavy fabrics or
special-care items by removing excess
water.
STEP 1. Set RINSE OPTIONS Control
to ONE RINSE.
STEP 2. Set SPEEDS Control:
For fast spin, use the HEAVY DUTY
setting.
For stow spin, use the DELICATE
setting.
STEP 3. Set the Cycle Selector Control
(Timer) knob to a SPIN setting.
STEP 4. Pull the Cycle Selector Control
(Timer) knob out to start washer.
27