Connecting Twisted Pair (Rj-45 Ports) - GarrettCom Magnum S14 Installation And User Manual

S14 Convenient Switches Installation and User Guide (06/04)
optional; it connects to the S14H chassis. Ensure that each lead is securely tightened from
the top, as shown here.
NOTE: Always use a voltmeter to measure the voltage of the incoming power supply
and figure out the +ve potential lead or -ve potential lead. The more +ve potential lead
will connect to the post labeled "+ve" and the rest to the "-ve".
The GND can be hooked up at the last.
When power is applied, the green PWR LED will illuminate.

3.8 Connecting Twisted Pair (RJ-45 ports)

The Magnum S14-Series Convenient Switches can be connected to only one
media type with two different speed i.e. 100BASE-TX and 10BASE-T. CAT 5 cables
should be used when making 100BASE-TX connections. When the ports are used as
www GarrettCom com . .
39