Connecting Twisted Pair (Rj-45, Cat 3, Cat 5 Or Cat 6, Unshielded Or Shielded) - GarrettCom Magnum CSG14 Series Installation And User Manual

CSG14 Series Gigabit Converter Switch
Fiber (Multi-mode)
Fiber (Single-mode)
Fiber (Multi-mode, Single-mode)
Fiber (Single-mode)
NOTE : It is recommended that high quality CAT 5E or CAT 6 cables (which work for
10Mbps, 100Mbps and 1000Mbps) be used whenever possible in order to provide
flexibility in a mixed-speed network, since CSG14 Series switch ports are auto-
sensing for either 10,100 or 1000Mbps. Note that the auto-cross function does
not operate, if the port is fixed or not supporting auto-negotiation.
3.8.1 Connecting Twisted Pair (RJ-45, CAT 3, CAT 5 or CAT 6, Unshielded or
Shielded)
The following procedure describes how to connect a 10BASE-T, 100BASE-TX
or 1000BASE-T twisted pair segment to the RJ-45 port. The procedure is the same for both
unshielded and shielded twisted pair cables.
www GarrettCom com . .
Installation and User Guide (12/08)
100BASE-FX
100BASE-FX
1000BASE-SX
1000BASE-LX/ZX
56
SC
SC, LC
SC, LC
LC