Auto-Cross (Mdix),Auto-Negotiation And Speed-Sensing - GarrettCom Magnum S14 Installation And User Manual

S14 Convenient Switches

4.2 Auto-cross (MDIX),Auto-negotiation and Speed-sensing

All the four RJ-45 ports independently support auto-cross (MDIX) in auto-
negotiation mode for speed in 10BASE-T and 100BASE-TX modes. The MDIX does the
auto-cross only under the Auto-
negotiation mode, and will not take
effect if the port is fixed.(port #2 can
be fixed to Full duplex). Operation is
according to the IEEE 802.3u
standard.
When a RJ-45 cable connection is made, and each time a LINK is enabled, auto-
negotiation takes place. The P80F or P80C advertises its capability for 10 or 100 Mbps
speed, and the device at the other end of the cable should similarly advertise / respond and
www GarrettCom com . .
Installation and User Guide (06/04)
10/
LA1
100
LA2
1
GarrettCom Magnum S14
Right Side View
45
F/H
PWR
LA3
3
2
FF
A